Blog

6. Are LED strip lights bright enough? This depends on where you want to use them, but you can expect your new LED strip lights to be just as bright as any other light source. They are also available with different lumen (brightness) values to give you greater flexibility.Feb 15, 2018

Determine how much light you will need. As a point of reference, remember that kitchen counters – often lit by under-cabinet fixtures – need about 4 to 10 watts of power per foot with 5 mm LEDs or about 20 watts per foot with high-power LEDs.

One of the simplest solutions to unsightly under-cabinet wires is using a cable protector. You can secure the wiring into one bundle with tie wraps and adhere it to the cabinet's underside with staples. The wiring length itself should extend directly from the light to the wall.

Steps: Keep the lights close to the front the wall cabinet, positioning the light over the center of the countertop. Install the lights by screwing the lights up into the bottom of the cabinet using 1/2" screws. 3. Depending on the kit, it may be better to wire the lights under the cabinets and staple the wires up,...

There are few steps to install led light strips in a car. First of all set the led strip underneath your vehicle, after that extend the wires, put the red wire to battery on positive side and put black wire on negative side. Place the module box close the battery, but away from the engine so there is no risk of damage.

Under Cabinet Lighting is a growing trend in the use of LED Strip Lights. Use LED Ribbon to light under your cabinets, above cabinet lighting, and even for toe kick lighting. The thin profile of LED Strip Lights make them perfect for lighting your kitchen cabinets because they are so versatile in the space that they fit in.

Under cabinet lighting along with recessed lighting is the most important lighting in your house. It provides functional task lighting for chopping veggies and other kitchen activities.

If you want to install under cabinet lighting as task lighting, you should place the strip lights closer to the middle front edge of the cabinets, so the countertop will be exposed to as much light as possible. For ambient or accent lighting, you may want to place them closer to the back edge.

For best results, use undercabinet LEDs that put out a minimum 400 lumens per foot; 500 lumens is even better, but harder to find.Jul 27, 2018

Hardwired System. This is a hardwired system using a dimmable hardwired transformer, compatible wall switch dimmer, custom in-wall cable, and our flexible LED strips. Measure available space for flex: The first step in any system is to determine how much flexible LED strips you will need to complete your system.

When mounting any fixture under a cabinet, position it to the front. If there is a lens, face it toward the backsplash. The bottom-front rail of the cabinet should hide the fixture from your line of sight, whether you're standing or seated. A plug-in fixture may be used for short runs of under-cabinet lighting.Mar 11, 2021

One of the simplest solutions to unsightly under-cabinet wires is using a cable protector. You can secure the wiring into one bundle with tie wraps and adhere it to the cabinet's underside with staples. The wiring length itself should extend directly from the light to the wall.

In general, one puck light is needed for every 8–12 in. of cabinet length. This spacing will provide the best uniformity and distribution of light and avoid any dark areas under the cabinets.

When buying LED strip lights, it is important to look at the number of LEDs per length. For brighter output and higher light quality, you should look for the strip lights that have the highest number of LEDs per Foot (Meter, Yard, etc).Sep 5, 2015