Blog

Professionals use large tanks of premium tar instead of buckets sold in stores. Sealcoats are applied to protect driveways from damage caused by gasoline and oils, salt, water, and UV rays.Jul 31, 2017

What happens if I don't seal my concrete? Concrete is a porous material that readily absorbs liquids. In freeze-thaw climates, the expansion of frozen liquids can destroy the surface of unsealed concrete. Oil, salt, fertilizer, and other household chemicals can discolor and damage unsealed concrete.

The best way to clean oil and grease stains from your exposed aggregate driveway is to apply a driveway cleaning solution that will break down the oil. Luckily, you can make this mixture using household products like dishwashing liquid or baking soda.Nov 4, 2019

Steps to Clean Exposed Aggregate

Step 1 – Saturate the surface with a cleaner leaving it to absorb into the concrete. ... Step 3 – Use a hose with a nozzle or ideally a high power pressure washer to sequentially move from the high end of the concrete slab to the lower drain area.Feb 4, 2020

These sealers are either a penetrating or surface type sealer. Epoxy is extremely popular for poured concrete, though expensive to install. ... For use only with concrete, they are generally more liquid than gel and penetrate through the surface of your driveway.Apr 13, 2018

Epoxy concrete sealers are the most durable, making them good for sealing garage floors and high-traffic retail environments. Softer acrylic sealers, which require a sacrificial floor wax, are more affordable and popular for residential concrete floors, including basements.

Does exposed aggregate need to be sealed? Yes. These sealers—typically film-forming acrylic resins—can help protect against spalling, dusting, efflorescence, freeze-thaw damage, stains, deicing salts, and abrasion. A sealer will also enhance the color of the aggregate, accentuating its depth and richness.Mar 9, 2021

Slow-evaporating solvents are better for rolling. If the product is sprayed, I like to back-roll on the primer (first) application. This works the material into the surface and improves the adhesion.”“Most decorative contractors, when doing a large area, prefer the spray/back-roll method,” Platt says.

Sealing exposed aggregate driveways can extend the life of the concrete as well as improve its looks. ... It's achieved when the top layer of concrete has been removed to expose the rocks underneath. A properly applied sealer will keep this finish in pristine condition so the concrete doesn't crumble or blemish over time.

Concrete sealers perform as water repellents—preventing water and chlorides from penetrating the concrete. ... Applied to concrete, sealers essentially perform as water repellents, eliminating or reducing the penetration of water and soluble contaminants, such as chlorides, into the porous concrete layer.Jul 22, 2013

As of 2021, we have found that the Behr Wet Look Sealer has shown major issues for Stamped Concrete, Brick Pavers, and other Decorative Concrete Surfaces. ... BEHR PREMIUM WET-LOOK SEALER is also an excellent topcoat for paints and stains. Applied to a stamped concrete walkway.Feb 18, 2021

How many coats should I apply? Two coats are always suggested because the first coat of any concrete sealer is usually absorbed into the concrete at different rates leaving the substrate unevenly sealed. A second coat will ensure proper even coverage.Jun 27, 2017

It is recommended to allow 24 hours for concrete surface to completely dry after pressure washing (may take longer to dry if humid environmental conditions exist or if the substrate is indoors).

Base 312 Exposed Aggregate Sealer will dry rapidly in hot and/or windy conditions. The first coat is typically dry in 3 hours and may be re- coated, however we suggest applying the first coat, letting this cure overnight and applying the second coat the next day.

Sealed surface may be slippery when wet. For additional slip resistance, use Glaze 'N Seal Grip 'N Seal additive. Product coverage will be 100 – 400 square feet per gallon for the first coat depending on surface porosity. Second coat will go up to 50% further.

A penetrating silane/siloxane blend is the best type of sealer to use on a new or existing driveway because it is able to repel water, salts, chlorides and some even repel oil and automobile fluids like the Invisible Penetrating Concrete and Masonry Water Repellent Sealer Plus Oil Repellent.

Well, the answer is yes! It is safe to pave asphalt over concrete. Concrete is a great base material because it is stable and allows for excellent compaction of the asphalt above. In fact, many miles of concrete roads are paved over with asphalt every year.Jun 24, 2014

• ToughCrete concrete sealer is one of the best performing concrete sealers on the market. The siloxane concrete sealer is the best option for curing and sealing your garage floor, driveway, patio, walkway, pool deck, or any other concrete surface.

• When it comes to sealing new concrete, you have a couple of options. You can seal the concrete before it is cured, or you can wait 28 days until the concrete is cured and then seal.

• Concrete aggregate is a material which is mixed with cement to create concrete which is hard, strong, and long-lasting. There are a number of different types of concrete aggregate, with contractors selecting their aggregate on the basis of the type of job being performed.

• Remove all oil,grease,stains,dirt,and dust from the concrete
• Strip any existing sealer from the surface
• Open up the concrete with an etching solution
• Apply a thin coat of sealer using a roller or sprayer
• Wait for the first layer of sealer to dry
• Apply a second coat in the opposite direction
• Allow the sealer to fully dry before walking or driving on your concrete

The best exposed aggregate sealer is a solvent based acrylic sealer. Use a ½” nap roller and coat one section of concrete at a time. If the concrete is broken up into squares due to the saw cuts in the concrete, coat one of these sections at a time to avoid overlap marks. Otherwise apply the exposed aggregate sealer quickly.

Since exposed aggregate isn’t as durable as solid concrete, it’s important to choose the right type of concrete sealer to maintain its quality. If your main goal is increasing the durability and the longevity of your exposed aggregate concrete a water-repellent penetrating sealer is recommended.

A concrete sealer or exposed aggregate sealer is essential for protecting surfaces from the elements, stains from dirt, oil and other contaminants, and much more. So, if you've just installed new concrete, whatever kind, make sure it gets sealed before it gets unsightly marks or stains that are permanent.Oct 11, 2019

One way to keep your concrete driveway, walkway or walls looking good is to wash them and seal them every 2 to 3 years. ... Sealer also helps prevent stains from setting in on the concrete. Sealing concrete after pressure washing is similar to painting walls in your house.

Bringing The Color Out In Concrete. Penetrating sealers won't change the look or color of the concrete, therefore should not be used to darken the surface. ... Water based acrylic sealers, like the Armor WB15 and Armor WB25, will enhance with a gloss, but they won't darken the surface and they won't enhance the color.May 1, 2017

Tip: When choosing siloxane sealer, look for a product that is water-based with a low VOC content. These will be easier to apply and safer. Acrylic concrete sealer keeps costs down, is easy to apply, and can be used on both interior and exterior surfaces.Nov 20, 2017

Not necessarily. Colored concrete will get good and hard just like normal concrete. However, all concrete benefits from being sealed against stains and water damage. So even though it's not necessary, sealing your colored concrete will make it look good longer and will help prevent dusting of the surface.

Slow-evaporating solvents are better for rolling. If the product is sprayed, I like to back-roll on the primer (first) application. This works the material into the surface and improves the adhesion.”“Most decorative contractors, when doing a large area, prefer the spray/back-roll method,” Platt says.

Even for those who live in areas where it never gets below freezing, sealing and coating your concrete driveway will help better protect it from discoloration, staining, and damage from oil, salt, and other household chemicals.Apr 6, 2017

The best type of acrylic is a virgin or pure acrylic resin. These sealers will last longer than styrene acrylics, with no yellowing. Other types of topical sealers for driveways are polyurethanes, epoxies and penetrating resins.

• Aggregate Concrete Sealers The Armor AG Brown seal is a great sealer for exposed aggregate surfaces. It will provide a semi-transparent brown tint that will help to bring out the natural characteristics of the aggregate below. The high gloss coating left behind is UV resistant, and it will help to prevent pebbles from becoming lose.

• When selecting an exposed aggregate sealer, look for a product that: When applying the sealer to fresh concrete, make sure all cement paste residue from the exposure process has been thoroughly removed to avoid sealing the milky-looking white paste on the surface.

• When applying the sealer to fresh concrete, make sure all cement paste residue from the exposure process has been thoroughly removed to avoid sealing the milky-looking white paste on the surface. On existing exposed-aggregate concrete, thoroughly clean the surface from oil, grease, dirt, and stains before applying a sealer.

Aggregate Concrete Sealers The Armor AG Brown seal is a great sealer for exposed aggregate surfaces. It will provide a semi-transparent brown tint that will help to bring out the natural characteristics of the aggregate below. The high gloss coating left behind is UV resistant, and it will help to prevent pebbles from becoming lose.

Failure to maintain an aggregate surface can result in a color loss, pitting, cracking, and leave the surface exposed to stains from spills. Cleaning and prepping the aggregate surface prior to sealing it is vital to the performance of the new sealer.

An exposed aggregate sealer will also reduce mold and mildew problems, stabilize the surface, protect color retention, and protect against freeze/thaw damage. An exposed aggregate sealer can be easily applied with excellent results by any homeowner.

Sealing aggregate concrete will further enhance its beauty and help protect it from the harsh elements and deicing salts. An exposed aggregate sealer will also reduce mold and mildew problems, stabilize the surface, protect color retention, and protect against freeze/thaw damage.

Although concrete is an extremely hard and durable material, it is very vulnerable to damage from erosion, freezing water, salts, and oils. Much of this damage can be avoided by simply pressure washing and weather-proofing in order to protect your concrete or aggregate driveway, patio or sidewalk.