Blog

Deck contractors and handyman services charge $2-$3 per linear foot for removing and disposing of old deck rail.

Say “No” to notching pressure-treated deck posts. We want you to build an outdoor railing system that you, your family and guests can enjoy without worrying about safety issues. In order to do so, you need to know this building shortcut is not advisable, and we recommend avoiding it at all costs.Mar 21, 2019

If your deck railing is loose or wobbly, it is probably the result of a weak rail post connection to the deck frame. Posts should be connected to the deck framing with lag screws or bolts at a minimum. Screws or nails are not generally acceptable.

THE AVERAGE LIFESPAN OF A WOOD DECK: Typically 10 to 15 years. The actual lifespan of your wood deck will depend on the type of wood you've chosen and how well you keep up with wood's rigorous maintenance schedule.Sep 8, 2021

If your existing deck is old, shabby and a maintenance nightmare, you don't have to tear it all down and start over. Chances are that the structural parts are still in good shape. If so, you can simply remodel it with new decking, rails and stairs, and save tons of money over the cost of a complete rebuild.

To stiffen the deck, go underneath and install a row of 2x8 blocks down the center, perpendicular to the joists. Stagger them with enough room to nail or screw them in place through the end grain, then fasten the treated 2x4s to the underside of the joists so they run from corner to corner, forming an X.

• Step 1: Cut Posts. Posts are as long as the height of the railing, plus the width of the joist and the thickness of the...
• Step 2: Mark and Drill Holes. Mark for two holes in the posts that are each 1 inch from opposite sides of the post and...
• Step 3: Cut Notches. For each post cut a notch in the decking so the post can fit tightly...

• Cut out the notch with a jigsaw. Start at the center of the rail and work toward the ends, spacing each baluster with the jig. Support the other end of the balusters with a 1-in. thick board. Screw the balusters through the stringer with 3-in. deck screws.

• 1. Use a screwdriver to check decking and railing for rot and replace damaged wood.
• 2. Install new boards with grain rings curving upwards; this helps keep them flat.
• 3. To remove stains caused by algae,mildew,and mold,spray deck with environmentally safe cleaner,which requires no brushing or rinsing; stains ...
• 4. To cut down on future maintenance,trim brush and trees to let in more sunlight.
• 5. Keep sprinklers and gutters from splashing water on deck.