Blog

Best for Porcelain: Bona Hard-Surface Floor Cleaner Spray

Keep your glazed or unglazed porcelain tile flooring looking its best with a pH-balanced cleaner like Bona Hard Surface Floor Cleaner. This popular formula is water-based and stands out as a safe choice for a tile cleaner, as it is Greenguard Gold Certified.Oct 26, 2021

The good news is that vinegar won't damage your porcelain tiles as long as it's used properly. ... This is because too much exposure to strong vinegar could strip away the finish on your porcelain. This will leave it more liable to damage and looking a bit worse for wear.Aug 21, 2020

• Mix 1 tablespoon of detergent in 1 gallon of warm water and use the solution to remove soap scum, water spots and soil from the tiles. For hard water scum, mix equal parts of vinegar and water and apply the solution with a nylon scouring pad to remove the spot.

• The best cleaners for tile floors are mild detergents diluted with water, nonabrasive all-purpose cleaners and lemon juice. It is important to rinse tile floors thoroughly to avoid leaving soapy residue, which causes tile to appear hazy.

• Mix Vinegar and Water. Mix 1/4 cup white vinegar with 1 gallon of warm water. If desired,you can add essential oils for scent.
• Mop Thoroughly. Use the vinegar and water mixture to mop the floor well.
• Rinse. Rinse the floor by mopping well with plain water.
• Sprinkle With Baking Soda. Sprinkle baking soda on the floor.
• Mop With Vinegar and Water Solution. Mop the floor with the vinegar and water solution.
• Flush to Remove Residue. Flush the floor thoroughly with plain water thoroughly to remove any residue.
• Go Section by Section. Work in small sections so that you can clean,rinse,and allow each portion of the floor to dry thoroughly.

Glazed Porcelain Tiles. 1 Sweep or Vacuum. Regularly sweep or vacuum your floors to remove grit that can damage the glaze. 2 Mop. Most mopping or cleaning procedures, including both natural and chemical, can be used to effectively refresh glazed ceramic floors. However, you ... 3 Prevent Stains. 4 Clean Stains. 5 Avoid Damage.

Use warm water and a clean microfiber cloth to wipe it dry after that. Cleaning glazed porcelain can be more time-consuming than matte porcelain, as it requires special care. In the beginning, you will need to sweep, vacuum, and then spray hot water to help loosen the stains.

For anyone wondering how to make porcelain tiles shine weekly, there are two types of cleaning that you should always perform. The first is week-to-week cleaning which consists of sweeping and vacuuming to remove any dirt or debris. The next way to clean is with a vinegar-water solution and should be completed monthly.

How Often to Clean Porcelain Floor Tiles. Sweep, vacuum, or mop your porcelain floors regularly. Depending on foot traffic, this might be daily or every few days. You can do a deeper cleaning as needed to sanitize the floor or remove dirt that has worked its way into the microscopic pores of the tiles.

Combine equal parts baking soda and borax, then add enough water to form a soft paste. Rub the paste gently into any stains or tough dirt. Rinse with clear water and wipe dry. Borax and soda makes a mild abrasive that removes dirt buildup without scratching the tile glaze.

• Top Tip. Doing the job regularly (once or twice weekly) is the best way to clean porcelain tiles, preventing a build-up of dirt and any unsightly stains from spreading. This can be accomplished with a simple sweep and vacuum to remove debris, followed by mopping with warm water. However, when dirt gets out of hand,...

• Rince tiles with clear, clean water. Polish by hand, with a buffer , or with a clean, dry, flat-head microfibre mop to bring to a high shine. If you are cleaning a large floor area you may want to clean the floor in sections, as is the water is allowed to dry you will get water spots and streaking on your tile.

How to Clean Glazed (Polished) Porcelain Tiles in the Shower Cleaning glazed porcelain can be more time-consuming than matte porcelain, as it requires special care. In the beginning, you will need to sweep, vacuum, and then spray hot water to help loosen the stains.

Cleaning a Dirty Porcelain Tiled Floor. If the floor is really dirty and in need of something more than just water, add 1/4 cup white vinegar to 2 gallons warm water. Mop the floor with the cleaning solution, then rinse with clean water and dry when finished.